*化学品物理状态代码（ChemicalPhysicalStateCode）
代码表：
代码值 | 代码名称 | 代码值定义 | ||
英文 | 中文 | 英文 | 中文 | |
| GAS | Gas | 气体 | A material, which has a vapor pressure greater than 300 kPa (43.5 psia) at 50°C (122°F) or is completely gaseous at 20°C (68°F) at a standard pressure of 101.3 kPa (14.7 psia). Including: · Aerosol: Any non-refillable receptacle containing a gas compressed, liquefied or dissolved under pressure, the sole purpose of which is to expel a nonpoisonous (other than a Division 6.1 Package Group III Material) liquid, paste, or powder and fitted with a self-closing release device allowing the contents to be ejected by the gas. · Asphyxiant Gas: A gas, which dilutes or replaces the oxygen normally in the atmosphere. · Compressed Gas in Solution: A non-liquefied compressed gas, which is dissolved in a solvent. · Liquefied Compressed Gas: A gas, which when packaged under pressure for transportation is partially liquid at temperatures above -50° C (-58° F). A liquefied compressed gas is further categorized as follows: o High Pressure Liquefied Gas: A gas with a critical temperature between -50 °C (-58° F) and + 65° C (149° F). o Low Pressure Liquefied Gas: A gas with a critical temperature above + 65° C (149° F). · Non-Liquefied Compressed Gas: A gas, which when packaged under pressure for transportation is entirely gaseous at -50° C (-58° F) with a critical temperature less than or equal to -50° C (-58° F). Oxidizing Gas: A gas, which may, generally by providing oxygen, cause or contribute to the combustion of other material more than air does. | 一种在50°C(122°F)条件下蒸气压大于300 kPa(43.5 psia)或在101.3 kPa(14.7 psia)标准压强及20°C(68°F)条件下完全呈气态的材料：包括·喷雾器：任何非重复充装容器，其中包含在压力下压缩、液化或溶解的某一气体，该容器的唯一目的是喷出无毒（不同于“6.1分类包装组III材料”中的某一类）液体、膏或粉末并配备一个自闭释放装置，可以将容器中的内容以气体方式喷出。·窒息性气体：一种通常在大气中稀释或替换氧气的气体。·溶液中的压缩气：一种非液化压缩气体，溶解于溶剂中。·液化压缩气：在压力下包装运输时，温度高于-50°C(-58°F)时部分为液体。液化压缩气进一步分类如下：o 高压液化气：一种临界温度在-50°C(-58°F)和+ 65°C(149°F)的气体。o 低压液化气：一种临界温度在+ 65°C(149°F)以上的气体。· 非液化压缩气：一种在压力下包装运输时，在-50°C (-58° F)（临界温度小于或等于-50°C(-58°F)）条件下完全呈气态的气体。氧化气体：一种（一般通过提供氧气）相较于空气更可能引起或导致其他材料燃烧的气体。 |
| LIQUID | Liquid | 液体 | A material, other than an elevated temperature material, with a melting point or initial melting point of 20°C (68°F) or lower at a standard pressure of 101.3 kPa (14.7 psia). A viscous material for which a specific melting point cannot be determined must be subjected to the procedures specified in ASTM D 4359 ’standard Test Method for Determining Whether a Material is Liquid or Solid”. | 一种不同于温升材料的材料，在101.3 kPa (14.7 psia)标准压强下，熔点或初始熔点为20°C (68°F)或更低。无法确定某一特定熔点的粘性材料必须遵循ASTM D 4359“确定某一材料是液体或固体的标准试验方法”中规定的程序。 |
| MIXED | Mixed | 混合状态 | Any combination of the other states. | 其他状态的任意组合。 |
| REFRIGERANT_OR_DISPERSANT_GAS | Refrigerant Or Dispersant Gas | 制冷或分散气体 | All non-toxic refrigerant gases, dispersant gases (fluorocarbons) and mixtures thereof, or any other compressed gas having a vapor pressure not exceeding 260 psia at 54°C (130°F), used only as a refrigerant, dispersant or blowing agent. | 所有无毒制冷气体、分散气体（碳氟化合物）及其混合物，或其他任何其蒸汽压在54°C (130°F)条件下不超过260 psia的压缩气体，仅用作制冷剂、分散剂或发泡剂。 |
| REFRIGERATED_LIQUID | Refrigerated Liquid | 低温液体 | Cryogenic Liquid . A refrigerated liquefied gas having a boiling point colder than -90°C (-130°F) at 101.3 kPa (14.7 psia). | 低温液体。冷凝液化气体，在101.3 kPa (14.7 psia)压强条件下其沸点低于 -90°C (-130°F) 。 |
| SOLID | Solid | 固体 | A material that does not meet the definition of a liquid or gas (i.e., powder, pellet, flake). | 不符合液体或气体定义的材料（即，粉末、颗粒、片状）。 |
附件列表
——标准内容仅供参考，如果您需要解决具体问题，建议您咨询相关领域专业人士。 编辑：王华/中国物品编码中心——本网站所有内容版权为中国物品编码中心所有，未经书面许可，不得进行以营利为目的的转载或传播。
相关评论
更多>>