*管道控制类型代码(PlumbingControlTypeCode)
代码表:
代码值 | 代码名称 | 代码值定义 | ||
英文 | 中文 | 英文 | 中文 | |
BARE_STEM_NO_OPERATOR | Bare Stem No Operator | This control is a peg or stem extending from the unit. There is no handle or lever on the end of the stem. | ||
CROSS_HANDWHEEL | Cross Handwheel | The control is a device, which resembles a cross or "+", which when attached to the stem can be turned to operate the unit. | ||
ELECTRIC_ACTUATORS | Electric Actuators | An electronic actuator converts energy (in the form of electricity) into motion. The motion can be rotary or linear, depending on the type of actuator. | ||
EXTENDED_LEVER_HANDLE | Extended Lever Handle | The control is a flat piece of material made such as for one end to fit over the stem and can be turned to operate the unit. The unit is considered an extended lever as it has another piece of material into which the stem is inserted thereby causing the handle to be set away from the unit it operates | ||
EXTENDED_LEVER_HANDLE_WITH_MEMORY_STOP | Extended Lever Handle With Memory Stop | The control is a flat piece of material made to fit over the stem and can be turned to operate the unit. The unit is considered an extended lever as it has another piece of material into which the stem is inserted thereby causing the handle to be set away from the unit it operates. Memory stop is a device which allows the user to set the range of motion allowable for the handle. | ||
EXTENDED_ROUND_HANDLE | Extended Rpund Handle | The control is a circular device which when attached to the stem can be turned to operate the unit. The unit is considered an extended lever as it has another piece of material into which the stem is inserted thereby causing the handle to be set away from the unit it operates. | ||
GEAR_OPERATOR | Gear Operator | The control is a device which contains a gear box and having a circular handle, thereby increasing the number of turns of the handle required to change the direction of the closure member, and reducing the force needed to operate the unit. | ||
HORIZONTAL_CHAIN_LEVER_HANDLE | Horizontal Chain Lever Handle | The control is a bar attached to a unit, designed to be mounted horizontally. A chain is attached on each end of the bar. By pulling on one chain or the other, the unit can be set into operation. | ||
INSULATION_HANDLE | Insulation Handle | The control is a device comprised of non-conductive materials which can be turned to operate the unit even when thermal pipe insulation is affixed around the unit. | ||
LEVER_HANDLE | Lever Handle | The control is a flat piece of material made such as for one end to fit over the stem and can be turned to operate the unit. | ||
LEVER_LOCK_OPERATOR | Lever Lock Operator | The control is a long handle with a catch mechanism. The position lock can be used to set the valve in the full open or full closed position. This type of control may or may not have the ability to be locked with a padlock. | ||
LOCKING_LEVER_HANDLE | Locking Lever Handle | The control is a flat piece of material made such as for one end to fit over the stem and can be turned to operate the unit. The lever has a secondary piece of material, which when engaged can hold the lever in one position. This type of control may or may not have the ability to be locked with a padlock. The control is a flat piece of material made such as for one end to fit over the stem and can be turned to operate the unit. The lever has a secondary piece of material, which when engaged can hold the lever in one position. This type of control may or may not have the ability to be locked with a padlock. | ||
LOCKSHIELD_OPERATOR | Lockshield Operator | The control is a stem with a keyed end. The control is operated by a lock shield key. The Key can be a simple as an allen key or more complex depending on the security required. | ||
PNEUMATIC_ACTUATORS | Pneumatic Actuators | A pneumatic actuator converts energy (in the form of compressed air, typically) into motion. The motion can be rotary or linear, depending on the type of actuator. | ||
POSITION_LOCK_OPERATOR | Position Lock Operator | The control is a long handle with a catch mechanism. The position lock can be used to set the valve in any position or as a memory stop so the valve may be reopened to the previous position. This type of control may or may not have the ability to be locked with a padlock. | ||
ROUND_HANDLE | Round Handle | The control is a circular device which when attached to the stem can be turned to operate the unit. | ||
SLOTTED | Slotted | A groove or slot which allows for screwdrivers to be used to operate the control. | ||
SOLENOID | Solenoid | A solenoid is a transducer device which converts energy into linear motion. | ||
SOLID_TEE_OPERATOR | Solid Tee Operator | The control is a piece of material in the shape of a "T" in which the stem can be inserted. The Tee can then be rotated to operate the unit. | ||
SQUARE_OPERATING_NUT | Square Operating Nut | The control comprises a nut at the top of the stem. This nut is square in shape. Turning the nut turns the stem causing the unit to operate. | ||
VERTICAL_CHAIN_LEVER_HANDLE | Vertical Chain Lever Handle | The control is a bar attached to a unit, designed to be mounted vertically. A chain is attached on each end of the bar. By pulling on one chain or the other, the unit can be set into operation. | ||
WING_HANDLE | Wing Handle | The control is a flat piece of material made such that the center of the device can over the stem and can be turned to operate the unit. The section of the bar are bent allowing for an easier grip and resemble wings. |
附件列表
->——标准内容仅供参考,如果您需要解决具体问题,建议您咨询相关领域专业人士。 编辑:王华/中国物品编码中心——本网站所有内容版权为中国物品编码中心所有,未经书面许可,不得进行以营利为目的的转载或传播。
相关评论
更多>>